AMS2 setup symptom
Won't turn on entry
Also called: understeer on entry
You brake, release, turn... and the nose runs wide.
Not enough front bite or too much entry stability.
Phase
Entry
Impact62/100
Risk28/100
What you want
Get the front to bite earlier on turn-in.
What you give up
You gain turn-in and give up some braking stability.
Start here
- 1Brake biasBrake Biasrearward(a small step)
- 2Front anti-roll barFront Anti-Roll Barsofter(1 click)
- 3Coast ramp lockingCoast Rampless(1 click)
- 4Front wingFront Wingmore(1 click)
only if it happens in fast corners
Where you will be working
The areas of the car your plan touches.
- Brakes1
- Front axle1
- Differential1
- Front wing1
Controls: Brake Bias · Front Anti-Roll Bar · Coast Ramp · Front Wing
Without touching the setup
- Brake Bias
Move 1-2 clicks rearward if fronts lock or it will not rotate under braking.
- ABS
Raise one step if it locks easily; lower if braking gets too long.
- Driving
Release brake smoother and open steering before throttle.
Similar symptoms
Updated 2026-08-24