AMS2 setup symptom
Rotates when you release brake
Also called: oversteer on the brakes
The rear starts passing the car right at turn-in.
Too much lift/brake rotation or not enough rear stability.
Phase
Entry
Impact74/100
Risk54/100
What you want
Calm the rear as you release the brake.
What you give up
You gain braking confidence and the car will rotate a bit less.
Start here
- 1Brake biasBrake Biasforward(a small step)
- 2Rear anti-roll barRear Anti-Roll Barsofter(1 click)
- 3Coast ramp lockingCoast Rampmore(1 click)
Where you will be working
The areas of the car your plan touches.
- Brakes1
- Rear axle1
- Differential1
Controls: Brake Bias · Rear Anti-Roll Bar · Coast Ramp
Without touching the setup
- Brake Bias
Move 1-2 clicks forward if the rear steps out while braking.
- Driving
Release brake smoother and open steering before throttle.
- Line
Enter wider, sacrifice entry and prioritize clean exit.
Similar symptoms
Updated 2026-08-24