Profile
Default+
Torque
20 Nm
Family
Direct drive
Confidence
Derived
Derived settings: there is no validated preset for this base, so we start from its family and torque recipe. An honest starting point, not dogma.
Wheelbases these settings are for
These settings are made for the models below. Open the sheet for full specs.
VRS DirectForce Pro DFP20
20 Nm
Purchase links are affiliate links: if you buy through them, Gonky Racing earns a commission at no extra cost to you.
VRS DirectForce Pro DFP20 in Automobilista 2: Default+ profile, Gain 42, Low Force Boost 0, FX 25 and Damping 30.
In AMS2
Type
Default+
Gain
42
Low Force Boost
0
FX
25
Damping
30
Menu Spring Strength
100
On the device
VRS Configuration Tool
Maximum Force
Personal limit
Smoothing
Low
Damping
Low
Friction
Low
Model notes
- 20 Nm servo: True-Drive-style philosophy, filters low and let the motor speak.
- Let the base do the smoothing; avoid stacking too much damping.
- Best tuned with clipping overlay visible for each car class.
About this base
A pro-grade 20 Nm Direct Drive base built around a MiGE 130ST industrial servo with a 22-bit BiSS-C encoder, driven by a separate all-in-one USB force-feedback controller with a 400 W fanless PSU and brake resistor. Mounts any OSW-style rim with a 70 mm PCD; 3-year warranty. Accurate, powerful and durable, with the controller split out for easy part swaps.