Profile
Custom / Default+
Torque
28 Nm
Family
Direct drive
Confidence
Derived
Derived settings: there is no validated preset for this base, so we start from its family and torque recipe. An honest starting point, not dogma.
SIMAGIC Alpha EVO Ultra in Automobilista 2: Custom / Default+ profile, Gain 48, Low Force Boost 0, FX 24 and Damping 32.
In AMS2
Type
Custom / Default+
Gain
48
Low Force Boost
0
FX
24
Damping
32
Menu Spring Strength
100
On the device
SimPro Manager
Total Force
100%
Wheel Rotation Angle
900° / Auto
Smooth Level
Low
Mechanical Damper
Low
Mechanical Friction
Low
FFB Frequency
High
Custom FFB profiles for this base
Community `ffb_custom_settings.txt` files that document settings for this specific base. They replace the FFB physics, not the in-game menu values.
Daniels Topspeed all-ine Custom File for all Bases 4-32Nm v1.5
rFuktor 5.0.1 - By Karsten with Shadak & Panos
| Car type | Gain | LFB | FX | Damping |
|---|---|---|---|---|
| Standard | 60% | 0% | 22-25% | 28% |
| Karts | 65% | 0% | 20% | 40% |
| Off-road | 52% | 0% | 26% | 40% |
| Street | 52% | 0% | 18% | 40% |
On the device
steer settings
- angle900
- hard lock angle900
- limit strengthNormal
basic settings
- force feedback36% (10Nm is my sweet spot / Increase or decrease for your sweet spot)
- filter level0
- wheel rotation speed100%
- feedback detail0
mechanical
- dynamic prediction level0
- steering torque assist3% (Reduces the high forces in curves and increases the feedback of fine details )
- mechanical damper0%
- mechanical friction9%
- mechanical inertia0% (Can be increased for very light wheels)
- slew rate control5%
other effects
- mechanical spring0%
- center damper0%
- game inertia100
- game centering100
- game damper100
- game friction100
It goes in Documents/Automobilista 2 and replaces whatever you have. The Pilot Manager installs it for you and keeps a copy of yours.
Or let the Pilot Manager install it
Pick your base, it shows these same values and writes the file for you, keeping a copy of yours first so you can always go back.
Daniels Topspeed all-ine Custom File for all Bases 1-32Nm v1.7
rFuktor 5.0.1 - By Karsten with Shadak & Panos
| Car type | Gain | LFB | FX | Damping |
|---|---|---|---|---|
| Standard | 60% | 0% | 20% | 35% |
| Karts | 65% | 0% | 17% | 40% |
| Off-road | 52% | 0% | 23% | 40% |
| Street | 52% | 0% | 15% | 40% |
On the device
steer settings
- angle900
- hard lock angle900
- limit strengthNormal
basic settings
- force feedback36% (10Nm is my sweet spot / Increase or decrease for your sweet spot)
- filter level0
- wheel rotation speed90%
- ffb details0
mechanical
- dynamic prediction level0
- steering torque assist3% (for Ralley Cars 10%)
- mechanical damper0%
- mechanical friction8%
- mechanical inertia0% (Can be increased for very light wheels)
- slew rate control5%
other effects
- mechanical centering0%
- center damper0%
- game inertia100
- game centering100
- game damper100
- game friction100
It goes in Documents/Automobilista 2 and replaces whatever you have. The Pilot Manager installs it for you and keeps a copy of yours.
Or let the Pilot Manager install it
Pick your base, it shows these same values and writes the file for you, keeping a copy of yours first so you can always go back.
Collection maintained by John B. Ellis · Download on OverTake
21 authors: Karsten Hvidberg · Shadak · Panos · Kuku · tUMi · NuScorpii · Joaquim Pereira · Reiza Studios · Alex291190 · Danielkart · Alegunner68 · Theodore Schultz · Manolo · Stakanov · Peter Stefani · TomP · NBrembo · Dmand · dud · Thirty-Four · Brock Harvey
Model notes
- 28 Nm of torque: start clearly below the Alpha values and raise slowly.
- Mini can use a bit more Gain than Alpha U.
- If straights feel buzzy, calm the base before adding more in-game damping.
Every setting in SIMAGIC SimPro Manager
What each setting does, its range and what we set for AMS2. Anything without a value, leave at default.
Source: Official SIMAGIC blogThis brand does not publish a manual with the full settings list. Names come from their per-game guides and the community, so they may vary with the software version.
Force
Overall Strength / Maximum Torque
Default
Overall base strength. Equivalent to Fanatec's FF or MOZA's Game FFB intensity.
Model dependent: check the table above.
Wheel Return Speed
Default
Active centering assist.
Low or zero: AMS2 already simulates self-centring from caster.
Mechanical feel
Damping
Default
Resistance based on rotation speed.
Speed Dependent Damping
Default
Damping that scales with car speed. A Simagic speciality.
Mechanical Friction
Default
Adds weight to the shaft: the higher, the harder to turn.
Inertia
Default
Wheel weight. Careful: the more you raise it, the more road detail you lose.
Detail
Road Sensitivity
Default
How much road detail reaches your hands.
If the rim rattles on the straights, lower this before the Gain.
Filter
Default
Signal smoothing.
Soft Lock
Default
Software rotation limits.
About this base
28 Nm flagship of the Alpha EVO platform (officially available Q1 2026). 5-pole-pair industrial servo, 21-bit encoder, magnetic-coupling QR and 11 connection ports including 3×RJ45 and CAN/CAN FD.
Wheelbases these settings are for
These settings are made for the models below. Open the sheet for full specs.
SIMAGIC Alpha EVO Ultra
28 Nm
Purchase links are affiliate links: if you buy through them, Gonky Racing earns a commission at no extra cost to you.