Profile
Default+
Torque
6 Nm
Family
Direct drive
Confidence
Derived
Derived settings: there is no validated preset for this base, so we start from its family and torque recipe. An honest starting point, not dogma.
PXN VD6 in Automobilista 2: Default+ profile, Gain 60, Low Force Boost 3, FX 32 and Damping 38.
In AMS2
Type
Default+
Gain
60
Low Force Boost
3
FX
32
Damping
38
Menu Spring Strength
100
On the device
PXN Play / firmware panel
Overall Force
90 - 100%
Steering Angle
900°
Damper
Low
Centering Spring
Off / by the game
Custom FFB profiles for this base
Community `ffb_custom_settings.txt` files that document settings for this specific base. They replace the FFB physics, not the in-game menu values.
Daniels Topspeed all-ine Custom File for all Bases 4-32Nm v1.5
rFuktor 5.0.1 - By Karsten with Shadak & Panos
Note: this base’s torque and the one the profile documents do not fully match; the numbers are from the closest model.
| Car type | Gain | LFB | FX | Damping |
|---|---|---|---|---|
| Standard | 60% | 0% | 22-25% | 28% |
| Karts | 65% | 0% | 20% | 40% |
| Off-road | 52% | 0% | 26% | 40% |
| Street | 52% | 0% | 18% | 40% |
It goes in Documents/Automobilista 2 and replaces whatever you have. The Pilot Manager installs it for you and keeps a copy of yours.
Or let the Pilot Manager install it
Pick your base, it shows these same values and writes the file for you, keeping a copy of yours first so you can always go back.
Daniels Topspeed all-ine Custom File for all Bases 1-32Nm v1.7
rFuktor 5.0.1 - By Karsten with Shadak & Panos
Note: this base’s torque and the one the profile documents do not fully match; the numbers are from the closest model.
| Car type | Gain | LFB | FX | Damping |
|---|---|---|---|---|
| Standard | 62% | 0% | 20% | 35% |
| Karts | 66% | 0% | 17% | 40% |
| Off-road | 53% | 0% | 23% | 40% |
| Street | 53% | 0% | 15% | 40% |
It goes in Documents/Automobilista 2 and replaces whatever you have. The Pilot Manager installs it for you and keeps a copy of yours.
Or let the Pilot Manager install it
Pick your base, it shows these same values and writes the file for you, keeping a copy of yours first so you can always go back.
Collection maintained by John B. Ellis · Download on OverTake
21 authors: Karsten Hvidberg · Shadak · Panos · Kuku · tUMi · NuScorpii · Joaquim Pereira · Reiza Studios · Alex291190 · Danielkart · Alegunner68 · Theodore Schultz · Manolo · Stakanov · Peter Stefani · TomP · NBrembo · Dmand · dud · Thirty-Four · Brock Harvey
Model notes
- Keep LFB almost off on direct drive bases.
- If the wheel oscillates on straights, increase damping before lowering Gain.
About this base
The mid Direct Drive base: a 6 Nm servo motor in the same VD family as the VD10, aimed at sim racers stepping up from gear/belt wheels without going to the top base. PC, USB.
Wheelbases these settings are for
These settings are made for the models below. Open the sheet for full specs.
PXN VD6
6 Nm
Purchase links are affiliate links: if you buy through them, Gonky Racing earns a commission at no extra cost to you.