Profile
Custom / Default+
Torque
12 Nm
Family
Direct drive
Confidence
Derived
Derived settings: there is no validated preset for this base, so we start from its family and torque recipe. An honest starting point, not dogma.
PXN VD10 in Automobilista 2: Custom / Default+ profile, Gain 42, Low Force Boost 0, FX 28 and Damping 34.
In AMS2
Type
Custom / Default+
Gain
42
Low Force Boost
0
FX
28
Damping
34
Menu Spring Strength
100
On the device
PXN Play / firmware panel
Overall Force
90 - 100%
Steering Angle
900°
Damper
Low
Centering Spring
Off / by the game
Custom FFB profiles for this base
Community `ffb_custom_settings.txt` files that document settings for this specific base. They replace the FFB physics, not the in-game menu values.
Daniels Topspeed all-ine Custom File for all Bases 4-32Nm v1.5
rFuktor 5.0.1 - By Karsten with Shadak & Panos
Note: this base’s torque and the one the profile documents do not fully match; the numbers are from the closest model.
| Car type | Gain | LFB | FX | Damping |
|---|---|---|---|---|
| Standard | 60% | 0% | 22-25% | 28% |
| Karts | 65% | 0% | 20% | 40% |
| Off-road | 52% | 0% | 26% | 40% |
| Street | 52% | 0% | 18% | 40% |
It goes in Documents/Automobilista 2 and replaces whatever you have. The Pilot Manager installs it for you and keeps a copy of yours.
Or let the Pilot Manager install it
Pick your base, it shows these same values and writes the file for you, keeping a copy of yours first so you can always go back.
Daniels Topspeed all-ine Custom File for all Bases 1-32Nm v1.7
rFuktor 5.0.1 - By Karsten with Shadak & Panos
Note: this base’s torque and the one the profile documents do not fully match; the numbers are from the closest model.
| Car type | Gain | LFB | FX | Damping |
|---|---|---|---|---|
| Standard | 60% | 0% | 20% | 35% |
| Karts | 65% | 0% | 17% | 40% |
| Off-road | 52% | 0% | 23% | 40% |
| Street | 52% | 0% | 15% | 40% |
It goes in Documents/Automobilista 2 and replaces whatever you have. The Pilot Manager installs it for you and keeps a copy of yours.
Or let the Pilot Manager install it
Pick your base, it shows these same values and writes the file for you, keeping a copy of yours first so you can always go back.
Collection maintained by John B. Ellis · Download on OverTake
21 authors: Karsten Hvidberg · Shadak · Panos · Kuku · tUMi · NuScorpii · Joaquim Pereira · Reiza Studios · Alex291190 · Danielkart · Alegunner68 · Theodore Schultz · Manolo · Stakanov · Peter Stefani · TomP · NBrembo · Dmand · dud · Thirty-Four · Brock Harvey
Model notes
- 12 Nm DD: mid-torque window, keep LFB at 0.
- Treat it closer to a high-torque DD than a CSL DD.
- If Default+ feels too busy, try Custom with the same Gain range.
About this base
PXN's top Direct Drive base: a low-inertia servo motor with a custom multi-pole design delivering 10 Nm constant (12 Nm peak), 24-bit resolution and PXN's own algorithm. Aluminium-alloy paddles, USB, PC only — a lot of torque per euro.
Wheelbases these settings are for
These settings are made for the models below. Open the sheet for full specs.
PXN VD10
12 Nm
Purchase links are affiliate links: if you buy through them, Gonky Racing earns a commission at no extra cost to you.