Profile
Custom / Default+
Torque
12 Nm
Family
Direct drive
Confidence
Medium
MOZA R12 in Automobilista 2: Custom / Default+ profile, Gain 38, Low Force Boost 0, FX 28 and Damping 32.
In AMS2
Type
Custom / Default+
Gain
38
Low Force Boost
0
FX
28
Damping
32
Menu Spring Strength
100
On the device
MOZA Pit House → Configuración
Maximum Steering Angle
900°
Game Force Feedback Intensity
90 - 100%
Maximum Torque Limit
60 - 80%
Here it does matter: at 12-21 Nm the torque ceiling is what protects your wrists. Raise it gradually.
Maximum Speed
100%
Hands-off Protection
On
Essential at high torque.
Natural Damper
25 - 35%
Natural Friction
0 - 5%
Natural Inertia
100%
Pit House default value.
Wheel Centering Force
0%
Centring is handled by the game: raise it here and the two fight each other.
We only list what affects FFB in AMS2. Leave the rest of the software (FFB curve, equaliser, wheel presets, calibration) at its defaults.
Custom FFB profiles for this base
Community `ffb_custom_settings.txt` files that document settings for this specific base. They replace the FFB physics, not the in-game menu values.
Daniels Topspeed all-ine Custom File for all Bases 4-32Nm v1.5
rFuktor 5.0.1 - By Karsten with Shadak & Panos
| Car type | Gain | LFB | FX | Damping |
|---|---|---|---|---|
| Standard | 60% | 0% | 22-25% | 28% |
| Karts | 65% | 0% | 20% | 40% |
| Off-road | 52% | 0% | 26% | 40% |
| Street | 52% | 0% | 18% | 40% |
On the device
settings
- synchronizationON
- soft limit stiffness7
- soft limit strengthHard
- soft limit game force strengthOn
handling feel
- game force feedback intensity84% (10Nm is my sweet spot / Increase or decrease for your sweet spot)
- professionel game force feedback intensity84%
- maximum output torque limit90%
- force feedback reversalOff
- force feedback interpolation0
- ffb center deadzone compensation0
- gear shift vibration intensity0-5 (according to your personal taste)
- maximum wheel100%
- hands-off protectionOff (Do not set it to On because it can cause anomalies in the FFB)
- maximum wheel speed100%
- performance outputFull
base force effects
- natural damping0%
- natural friction8%
- natural inertia190%
- wheel spring strength0%
- speed-dependent damping0%
- start point of speed-dependent damping0 km/h
game force effects
- game spring0%
- game damping0%
- game inertia0%
- game friction0%
other base settings
- ffb effect equalizerLinearly set everything to 100%
- base ffb curveLinear
It goes in Documents/Automobilista 2 and replaces whatever you have. The Pilot Manager installs it for you and keeps a copy of yours.
Or let the Pilot Manager install it
Pick your base, it shows these same values and writes the file for you, keeping a copy of yours first so you can always go back.
Daniels Topspeed all-ine Custom File for all Bases 1-32Nm v1.7
rFuktor 5.0.1 - By Karsten with Shadak & Panos
| Car type | Gain | LFB | FX | Damping |
|---|---|---|---|---|
| Standard | 60% | 0% | 20% | 35% |
| Karts | 65% | 0% | 17% | 40% |
| Off-road | 52% | 0% | 23% | 40% |
| Street | 52% | 0% | 15% | 40% |
On the device
settings
- maximum steering angle900
- maximum limit/steering angle synchronizationON
- soft limit stiffness7
- soft limit strengthHard
- soft limit game force strengthOn
handling feel
- game force feedback intensity84% (10Nm is my sweet spot / Increase or decrease for your sweet spot)
- professionel game force feedback intensity84%
- maximum output torque limit90%
- force feedback reversalOff
- force feedback interpolation0
- ffb center deadzone compensation0
- gear shift vibration intensity1 (This effect can be adjusted as desired)
- maximum wheel speed100%
- hands-off protectionOff (Do not set it to On because it can cause anomalies in the FFB)
- performance outputFull
base force effects
- natural damping0%
- natural friction8%
- natural inertia190%
- wheel spring strength0%
- speed-dependent damping0%
- start point of speed-dependent damping0 km/h
game force effects
- game spring0%
- game damping0%
- game inertia0%
- game friction0%
other base settings
- ffb effect equalizerLinearly set everything to 100%
- base ffb curveLinear
It goes in Documents/Automobilista 2 and replaces whatever you have. The Pilot Manager installs it for you and keeps a copy of yours.
Or let the Pilot Manager install it
Pick your base, it shows these same values and writes the file for you, keeping a copy of yours first so you can always go back.
Collection maintained by John B. Ellis · Download on OverTake
21 authors: Karsten Hvidberg · Shadak · Panos · Kuku · tUMi · NuScorpii · Joaquim Pereira · Reiza Studios · Alex291190 · Danielkart · Alegunner68 · Theodore Schultz · Manolo · Stakanov · Peter Stefani · TomP · NBrembo · Dmand · dud · Thirty-Four · Brock Harvey
Model notes
- On the R12 you can run Gain 4-6 points higher than this baseline before clipping.
- Lower Gain as torque increases: R12 can run higher than R21.
- Keep LFB at 0 unless the center genuinely feels empty.
Every setting in MOZA Pit House
What each setting does, its range and what we set for AMS2. Anything without a value, leave at default.
Source: Official Pit House manualSteering range
Maximum steering angle
For AMS2900°
Total wheel rotation from lock to lock.
AMS2 applies each car's real angle internally: leave it at 900° and do not change it per car.
Soft limit (game force)
Default
Soft software bumpstop at the rotation limit.
Handling feel
Game force feedback intensity
For AMS290 – 100%
Overall intensity of the force feedback sent by the game.
This is the master volume. Raise it before the in-game Gain if you are short on force.
FFB intensity in professional games
Default
Second multiplier the manual describes as adjustable “up to twice” the basic level. MOZA does not document which titles it applies to.
MOZA does not clarify whether AMS2 goes through here: leave it at default and use the setting above.
Maximum output torque limit
Default
Hard ceiling on motor torque.
Model dependent: check the value in the table above.
Maximum steering wheel speed limit
For AMS2100%
Caps how fast the wheel can spin, to protect the driver.
Lower it only if the wheel scares you in spins.
Hand-off protection
For AMS2On
Detects hands off the wheel and returns it to neutral.
Always leave it on — even more so at high torque.
Wheel inertia
Default
Compensation for the weight of the rim you have fitted.
It is per rim, not per game: leave it as it comes.
Base force feedback effects
Effects generated by the BASE, not the game. In AMS2 keep them low and let the game speak.
Natural damper
Default
Resistance proportional to rotation speed. Calms oscillations.
Model dependent: check the table above.
Natural friction
For AMS20 – 5%
Constant friction regardless of speed. Simulates an unassisted steering rack.
Keep it low: too much friction eats the game's detail.
Natural inertia
For AMS2100%
Simulates steering column weight: resists sudden changes.
MOZA suggests 200-300% for GT cars if you like a heavy wheel; it brings back some lost detail.
Mechanical centering strength
For AMS20%
Centering spring that does NOT come from the game.
At zero: AMS2 handles centring. Raise it and the two fight each other.
Road sense equalizer
This is where road detail lives. The manual calls it “Road sense equalizer” / “Game force filtering”; MOZA blogs call it “Road Sensitivity” (0-10). It is an equaliser by frequency bands, not a single slider.
Road sense equalizer / Game force filtering
Default
Per-band gain of the road detail the game sends.
Leave it flat by default. If the tarmac buzzes too much, lower FX in AMS2 before touching the equaliser.
About this base
For many, the R12 V2 is the sweet spot of MOZA’s line-up: 12 Nm of direct torque with a 21-bit encoder and a carbon-fibre rotor that improves heat dissipation, plus front mounting and a more refined FFB than the first version. Its 216 W servo motor and aerospace-grade aluminium chassis give a strong, consistent response session after session. It is powerful enough to convey grip with authority in GT3, prototypes and endurance, without the size of the 21-25 Nm bases. In Automobilista 2 it is one of the most recommendable bases for serious use in virtually any class.
Wheelbases these settings are for
These settings are made for the models below. Open the sheet for full specs.
MOZA R12
12 Nm
Purchase links are affiliate links: if you buy through them, Gonky Racing earns a commission at no extra cost to you.