Profile
Custom / Default+
Torque
11 Nm
Family
Direct drive
Confidence
Medium
Logitech G PRO Racing Wheel in Automobilista 2: Custom / Default+ profile, Gain 55, Low Force Boost 0, FX 32 and Damping 36.
In AMS2
Type
Custom / Default+
Gain
55
Low Force Boost
0
FX
32
Damping
36
Menu Spring Strength
100
On the device
Logitech G HUB
Operating Range
900°
Overall Strength
90 - 100%
Dampener
Around 20
TrueForce Audio
Low / Medium
Compatibility Mode
Off unless needed
Custom FFB profiles for this base
Community `ffb_custom_settings.txt` files that document settings for this specific base. They replace the FFB physics, not the in-game menu values.
Daniels Topspeed all-ine Custom File for all Bases 4-32Nm v1.5
rFuktor 5.0.1 - By Karsten with Shadak & Panos
| Car type | Gain | LFB | FX | Damping |
|---|---|---|---|---|
| Standard | 60% | 0% | 22-25% | 28% |
| Karts | 65% | 0% | 20% | 40% |
| Off-road | 52% | 0% | 26% | 40% |
| Street | 52% | 0% | 18% | 40% |
On the device
base settings
- operating angle900
- dampener0
- strength10Nm (10Nm is my sweet spot / Increase or decrease for your sweet spot)
- force feedback filter0-8 (Test different levels to achieve the best result)
It goes in Documents/Automobilista 2 and replaces whatever you have. The Pilot Manager installs it for you and keeps a copy of yours.
Or let the Pilot Manager install it
Pick your base, it shows these same values and writes the file for you, keeping a copy of yours first so you can always go back.
Daniels Topspeed all-ine Custom File for all Bases 1-32Nm v1.7
rFuktor 5.0.1 - By Karsten with Shadak & Panos
| Car type | Gain | LFB | FX | Damping |
|---|---|---|---|---|
| Standard | 60% | 0% | 20% | 35% |
| Karts | 65% | 0% | 17% | 40% |
| Off-road | 52% | 0% | 23% | 40% |
| Street | 52% | 0% | 15% | 40% |
On the device
base settings
- operating angle900
- dampener0
- strength10Nm (10Nm is my sweet spot / Increase or decrease for your sweet spot)
- force feedback filter1 or 2 (Test different levels to achieve the best result)
It goes in Documents/Automobilista 2 and replaces whatever you have. The Pilot Manager installs it for you and keeps a copy of yours.
Or let the Pilot Manager install it
Pick your base, it shows these same values and writes the file for you, keeping a copy of yours first so you can always go back.
Collection maintained by John B. Ellis · Download on OverTake
21 authors: Karsten Hvidberg · Shadak · Panos · Kuku · tUMi · NuScorpii · Joaquim Pereira · Reiza Studios · Alex291190 · Danielkart · Alegunner68 · Theodore Schultz · Manolo · Stakanov · Peter Stefani · TomP · NBrembo · Dmand · dud · Thirty-Four · Brock Harvey
Model notes
- Unlike G29/G923, keep LFB at 0 because this is direct drive.
- If TrueForce gets noisy, reduce effects before lowering Gain.
Every setting in Logitech G HUB
What each setting does, its range and what we set for AMS2. Anything without a value, leave at default.
Source: AMS2 wiki (Logitech section)Wheel
Operating Range
For AMS2900
Degrees of rotation.
Sensitivity
For AMS250
Linearity of the wheel response. 50 = linear.
Leave it at 50: any other value distorts the steering ratio.
Centering Spring Strength
For AMS220
Wheel-generated centering spring.
The AMS2 wiki sets it to 20 on the G29/G923: geared wheels need some help around the centre.
TRUEFORCE
For AMS2On
Vibration generated from the game audio (G923, G PRO, RS50).
If the rim rattles, lower this before the game's FX.
About this base
Logitech's first Direct Drive wheel: 11 Nm with TRUEFORCE force feedback, an OLED display, magnetic Hall-effect shift paddles, dual clutch and a quick release. Sold in PC/PlayStation and Xbox versions.
Wheelbases these settings are for
These settings are made for the models below. Open the sheet for full specs.
Logitech G PRO Racing Wheel
11 Nm
Purchase links are affiliate links: if you buy through them, Gonky Racing earns a commission at no extra cost to you.