Profile
Default+
Torque
7 Nm
Family
Direct drive
Confidence
Derived
Derived settings: there is no validated preset for this base, so we start from its family and torque recipe. An honest starting point, not dogma.
Wheelbases these settings are for
These settings are made for the models below. Open the sheet for full specs.
CAMMUS C5
7 Nm
Purchase links are affiliate links: if you buy through them, Gonky Racing earns a commission at no extra cost to you.
CAMMUS C5 in Automobilista 2: Default+ profile, Gain 60, Low Force Boost 3, FX 32 and Damping 38.
In AMS2
Type
Default+
Gain
60
Low Force Boost
3
FX
32
Damping
38
Menu Spring Strength
100
On the device
CAMMUS Drive
Max Torque
90 - 100%
Steering Range
900°
Damping
Low
Inertia / Friction
Low
Model notes
- Keep LFB almost off on direct drive bases.
- If the wheel oscillates on straights, increase damping before lowering Gain.
About this base
An ultra-slim all-in-one Direct Drive unit (wheel and base in one): 5 Nm holding / 7 Nm peak in a compact 278 mm body (~3.6 kg) with a carbon-fibre face, leather grip, 20 buttons and 3 rotary encoders. Clamps to a desk easily; PC, with cloud app control.