Profile
Custom / Default+
Torque
12 Nm
Family
Direct drive
Confidence
Derived
Derived settings: there is no validated preset for this base, so we start from its family and torque recipe. An honest starting point, not dogma.
CAMMUS C12 in Automobilista 2: Custom / Default+ profile, Gain 42, Low Force Boost 0, FX 28 and Damping 34.
In AMS2
Type
Custom / Default+
Gain
42
Low Force Boost
0
FX
28
Damping
34
Menu Spring Strength
100
On the device
CAMMUS Drive
Max Torque
90 - 100%
Steering Range
900°
Damping
Low
Inertia / Friction
Low
Custom FFB profiles for this base
Community `ffb_custom_settings.txt` files that document settings for this specific base. They replace the FFB physics, not the in-game menu values.
Daniels Topspeed all-ine Custom File for all Bases 4-32Nm v1.5
rFuktor 5.0.1 - By Karsten with Shadak & Panos
| Car type | Gain | LFB | FX | Damping |
|---|---|---|---|---|
| Standard | 60% | 0% | 22-25% | 28% |
| Karts | 65% | 0% | 20% | 40% |
| Off-road | 52% | 0% | 26% | 40% |
| Street | 52% | 0% | 18% | 40% |
On the device
base settings
- steering range900
- power84% (10Nm is my sweet spot / Increase or decrease for your sweet spot)
- natural damping0%
- natural friction8%
- natural inertia0% (Can be increased for very light wheels)
- idle spring0%
game effects
- effects intenity100%
- cf filter50%
- q filter50%
- game friction50%
- game spring50%
assistance
- ffb invertOFF
- hands-off protectionDisable
- end stop strengthHard
- high speed stability assistall Linear
other base settings
- overheat protectionTemperatur threshold 85 C
It goes in Documents/Automobilista 2 and replaces whatever you have. The Pilot Manager installs it for you and keeps a copy of yours.
Or let the Pilot Manager install it
Pick your base, it shows these same values and writes the file for you, keeping a copy of yours first so you can always go back.
Daniels Topspeed all-ine Custom File for all Bases 1-32Nm v1.7
rFuktor 5.0.1 - By Karsten with Shadak & Panos
| Car type | Gain | LFB | FX | Damping |
|---|---|---|---|---|
| Standard | 60% | 0% | 20% | 35% |
| Karts | 65% | 0% | 17% | 40% |
| Off-road | 52% | 0% | 23% | 40% |
| Street | 52% | 0% | 15% | 40% |
On the device
base settings
- steering range900
- power84% (10Nm is my sweet spot / Increase or decrease for your sweet spot)
- natural damping0%
- natural friction8%
- natural inertia0% (Can be increased for very light wheels)
- idle spring0%
game effects
- effects intenity100%
- cf filter50%
- q filter50%
- game friction50%
- game spring50%
assistance
- ffb invertOFF
- hands-off protectionDisable
- end stop strengthHard
- high speed stability assistall Linear
other base settings
- overheat protectionTemperatur threshold 85 C
It goes in Documents/Automobilista 2 and replaces whatever you have. The Pilot Manager installs it for you and keeps a copy of yours.
Or let the Pilot Manager install it
Pick your base, it shows these same values and writes the file for you, keeping a copy of yours first so you can always go back.
Collection maintained by John B. Ellis · Download on OverTake
21 authors: Karsten Hvidberg · Shadak · Panos · Kuku · tUMi · NuScorpii · Joaquim Pereira · Reiza Studios · Alex291190 · Danielkart · Alegunner68 · Theodore Schultz · Manolo · Stakanov · Peter Stefani · TomP · NBrembo · Dmand · dud · Thirty-Four · Brock Harvey
Model notes
- Treat it closer to a high-torque DD than a CSL DD.
- If Default+ feels too busy, try Custom with the same Gain range.
About this base
The bigger all-in-one: 12 Nm of constant Direct Drive torque with a 300 mm carbon-fibre rim, 14 buttons, 2 paddles, 2 joysticks and 2 rotary encoders, at just 4.8 kg — about 3 kg lighter than a typical base + wheel. Great value for GT racing on PC.
Wheelbases these settings are for
These settings are made for the models below. Open the sheet for full specs.
CAMMUS C12
12 Nm
Purchase links are affiliate links: if you buy through them, Gonky Racing earns a commission at no extra cost to you.