Profil
Custom / Default+
Drehmoment
12 Nm
Familie
Direct Drive
Vertrauen
Mittel
Bases, für die diese Einstellungen gedacht sind
Diese Einstellungen sind für die folgenden Modelle. Für alle Specs das Datenblatt öffnen.
Fanatec ClubSport DD
12 Nm
Die Kauflinks sind Affiliate-Links: Wenn du darüber kaufst, erhält Gonky Racing eine Provision – ohne Mehrkosten für dich.
Fanatec ClubSport DD in Automobilista 2: Profil Custom / Default+, Verstärkung (Gain) 42, Low Force Boost (LFB) 0, Effekte (FX) 28 und Dämpfung (Damping) 34.
In AMS2
Typ
Custom / Default+
Verstärkung (Gain)
42
Low Force Boost (LFB)
0
Effekte (FX)
28
Dämpfung (Damping)
34
Menü-Federkraft (Menu Spring)
100
Am Gerät
Fanatec Tuning Menu
SEN
Auto
FFB
100%
FFS
Peak
NDP
10 - 20%
NFR
0 - 3%
NIN
0 - 5%
INT
3 - 4
FEI
80 - 100
FOR
100%
Hinweise zum Modell
- Treat it closer to a high-torque DD than a CSL DD.
- If Default+ feels too busy, try Custom with the same Gain range.
Alle Einstellungen von Fanatec Tuning Menu
Was jede Einstellung macht, ihr Bereich und was wir für AMS2 setzen. Alles ohne Wert: auf Standard lassen.
Quelle: Official Tuning Menu FAQMain
SEN — Sensitivity
Für AMS2AUTO
Degrees of rotation. On AUTO the game sets it.
FF — Force Feedback
Standard
Maximum motor strength when the game sends FFB.
Model dependent: check the table above.
FEI — Force Effect Intensity
Für AMS280 – 100
Intensity and sharpness of effects: 0 is smoothest, 100 sharpest and most direct.
INT — FFB Interpolation
Für AMS22 – 4
Smooths the game signal and raises its refresh rate. Higher = smoother.
LIN — FFB LinearityNur DD
Standard
Linearises the force response. DD bases only.
Natural effects (DD only)
Generated by the BASE, not the game. In AMS2 keep them low.
NDP — Natural DamperNur DD
Standard
Damping that reacts to wheel acceleration and angle.
Model dependent: check the table above.
NFR — Natural FrictionNur DD
Für AMS20 – 3
Simulates the mechanical feel of steering components.
NIN — Natural InertiaNur DD
Für AMS20 – 5
Simulates added weight on the steering axle. Useful with very light rims.
DirectInput effects
Effects the game requests via DirectInput. AMS2 does not use them heavily: leave at 100 unless you want them off.
FOR — Force
Für AMS2100%
Scales constant force effects.
SPR — Spring
Standard
Scales the spring effect (pulls the wheel to the dynamic centre).
AMS2 barely uses it; the default (100) is harmless.
DPR — Damper
Standard
Scales the damper effect requested by the game.
Wheel / pedals
SHO — Shock
Standard
Rim rumble motors, if your wheel has them.
BLI — Brake Level Indicator
Standard
Vibrates when you reach the brake % you set.
BRF — Brake Force
Standard
Brake pedal curve (load cell).
MPS — Multi Position Switch
Standard
Mode for the rim multi-position switches.
Über diese Base
12-Nm-Direct-Drive-Base (15 Nm Haltedrehmoment nach dem Firmware-Update Mai 2026), mit einem in Deutschland maßgefertigten Servomotor und dem QR2-Schnellwechsler. PC und PlayStation.